GPE supplies F Series mud pumps for land drilling rigs, workover service, deep-well drilling, rig upgrades and high-pressure mud circulation. Select the model by required flow, working pressure, available drive power, liner size and existing rig configuration.
F Series mud pumps cover multiple power classes rather than one fixed operating point. Use F-500 / F-800 / F-1000 for lower-to-mid power requirements, F-1300 / F-1600 for heavier drilling duty, and F-2200HL where a higher-power, higher-pressure project configuration is required. Final selection should be confirmed from flow, pressure, liner and drive conditions.
Each model page is responsible for its own specifications and application details. This category page remains the commercial comparison hub for the complete F Series family.
Browse the dynamic product list below and open the exact model page for technical specifications, configuration options and quotation support.
Use this table for model-level comparison. Published maximum pressure is configuration dependent, and maximum pressure and maximum displacement should not be assumed to occur at the same liner size or operating point.
| Model | Rated Power | Stroke | Max. SPM | Published Max. Pressure | Commercial Position | Product |
|---|---|---|---|---|---|---|
| F-500 | 500 HP / 373 kW | 7½ in | 165 | Up to 5,000 psi | Compact / small land rig / workover / lighter drilling duty | View F-500 → |
| F-800 | 800 HP / 597 kW | 9 in | 150 | Up to 5,000 psi | Land drilling / workover / medium-duty circulation | View F-800 → |
| F-1000 | 1000 HP / 746 kW | 10 in | 140 | Up to 5,000 psi | Medium-depth drilling / land-rig applications | View F-1000 → |
| F-1300 | 1300 HP / 970 kW | 12 in | 120 | Up to 5,000 psi | Deep-well / medium-to-heavy land drilling | View F-1300 → |
| F-1600 | 1600 HP / 1193 kW | 12 in | 120 | Up to 5,000 psi | Deep-well / ERD / heavy-duty drilling circulation | View F-1600 → |
| F-2200HL | 2200 HP / 1641 kW | 190 mm | 120 | Up to 7,500 psi | Ultra-deep / high-pressure / high-power drilling projects | View F-2200HL → |
Note: Values above are based on the currently published GPE model pages. Final operating pressure, displacement, liner size and drive configuration must be confirmed for the selected pump and project.
The model should be selected from the drilling requirement, not from horsepower or well depth alone.
Start with the circulation rate required by the drilling program, hole section and mud system.
Confirm standpipe pressure and the pressure basis of the complete circulation system.
Match rated pump power to the electric, diesel or mechanical drive actually available on the rig.
Balance liner diameter and stroke rate against displacement, working pressure and wear life.
Do not select an F Series replacement pump or wear part from the model name alone. Interface details and replacement parts can vary by pump configuration, manufacturer history and project requirement.
For drilling contractors, rig owners, EPC buyers and distributors, the purchasing decision also depends on technical confirmation, documentation and long-term spare-parts planning.
Existing model information, drawings and interface dimensions can be reviewed before the pump configuration is confirmed.
Inspection, testing and required technical documents can be defined as part of the project quotation and production scope.
Liners, pistons, valves, seats, fluid-end parts and power-end spares can be planned around the selected model.
Use these pages for engineering selection and broader mud-pump research while this category remains focused on F Series product comparison.
Send the required flow rate, working pressure, available drive power, preferred model and any existing pump drawing. GPE can review the configuration before quotation.
Request a Technical Quote Send Your DrawingPartner with GPE OIL Machinery for your best petroleum mud pump solution.
